High-Efficiency Coir Peat Dryer for Coconut Fiber Production

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: YF peat dryer
• Movement Way: Agitation
• Heating Mode: Transmission
• Material Status: Powder
• Drying Medium: Effluent Gas
• Operation Pressure: Atmospheric Pressure
• Drum Number: Multiple
• Type: Immersion Type
• Fuel: Gas/0il/Electric/Steam/Biomass/Coal Heating
• Factory Visit: Warmly Welcomed
• Customized: Customized
• Transport Package: Exporting Standard Package
• Specification: YFMG3430
• Trademark: YunFan
• Origin: Jining, Shandong
• HS Code: 8419399090
• Production Capacity: 1800t/D

Product Description

Product Description

A peat dryer is a drying equipment specifically designed for peat (turf) materials. It removes excess moisture from peat through specific heat transfer methods to achieve the moisture content required for subsequent processing or application. As a natural resource rich in organic matter, peat has characteristics such as high moisture content, high fiber content, and low density. The peat dryer adopts a customized drying process tailored to these features, efficiently dehydrating peat while maximizing the retention of its organic components and original physical structure, thus avoiding nutrient loss or material fragmentation caused by over-drying. The equipment typically consists of a feeding system, drying host, heat source system, exhaust gas dust removal system, discharge system, and control system. It can adjust operating parameters according to the initial moisture content of peat (generally 40%-70%) and the target moisture content (usually 10%-20%) to meet the needs of different application scenarios.

Working Principle

The core principle of a peat dryer is to utilize full contact between heat energy and peat materials, achieving moisture evaporation through heat conduction, convection, or radiation. The specific process is as follows:

1. Feeding and Pretreatment: Wet peat is crushed or sieved, then transported into the drying host by a conveying device (such as a screw conveyor) to ensure uniform distribution of materials and avoid agglomeration that may affect drying efficiency.

2. Heat Exchange Drying: In the drying host (common types include drum-type, belt-type, or fluidized bed-type, with drum-type being widely used due to its strong adaptability), hot air generated by heat sources (such as natural gas, biomass fuel, steam, or electric heating) comes into contact with peat materials in a countercurrent or cocurrent manner. Heat is transferred to the surface and interior of the materials, causing moisture to evaporate into water vapor.

3. Gas-Solid Separation: Moisture-rich exhaust gas is drawn into a dust removal and purification system (such as a cyclone separator or bag filter) by an induced draft fan. After dust separation, the exhaust gas that meets the standards is discharged. The dried peat is discharged through the discharge system after optional cooling, with its moisture content reduced to the target value.

4. Intelligent Control: Sensors are used to monitor material temperature, humidity, and exhaust gas parameters in real-time. The control system automatically adjusts heat source supply, material conveying speed, etc., to ensure stable and efficient drying processes.

Specification

Model	Capacity(T/D)	Initial moisture(%)	Final moisture(%)	Total Power(kw)	Covering area(m^2)
YFMG1916	300	<30%	(13±2)%	130	42*16
YFMG2220	500			150	46*16
YFMG2522	800			200	48*16
YFMG2825	1000			250	51*16
YFMG3026	1300			280	52*18
YFMG3228	1500			330	55*18
YFMG3430	1800			380	56*18
YFMG3632	2200			450	58*18
YFMG3835	2700			560	60*18
YFMG4036	3000			660	60*18
Note. the capacity of equipment is directly related to the reduction of water content of coal. The proportion of precipitation is large, and the production capacity of equipment decreases correspondingly.

Product Features

1. Strong Targeted Design: Specifically designed for the high humidity and loose characteristics of peat, it adopts special lifting plates (for drum-type) or air distribution structures to avoid material adhesion and blockage, ensuring uniform drying.

2. High Efficiency and Energy Saving: Heat air fully contacts materials, resulting in high heat utilization efficiency. Some equipment can be equipped with waste heat recovery devices to reduce energy consumption. It supports multiple heat source adaptations, flexibly adapting to energy conditions in different regions.

3. Protection of Material Properties: Mainly using low-temperature drying (usually 60-120°C) to avoid high temperatures damaging effective components in peat such as organic matter and humic acid, thus retaining its fertility and adsorption performance.

4. Environmental Compliance: Integrating efficient dust removal equipment to reduce dust emissions. If using clean energy (such as natural gas or electricity), it can achieve low-pollution operation, meeting environmental protection standards.

5. Large and Flexible Processing Capacity: The hourly processing capacity of a single device ranges from several tons to dozens of tons, which can be customized according to needs, adapting to small-scale processing or large-scale production lines.

Application

Peat dryers are widely used in various fields using peat as raw materials, mainly including:

1. Agriculture and Horticulture: Dried peat can be used as seedling substrates, flower cultivation soil, and organic fertilizer carriers. Its loose, breathable, water-retention, and fertilizer-retention properties can promote plant growth.

2. Energy Sector: Low-moisture peat can be used as biomass fuel (such as formed into peat sticks or blocks) for power generation, heating, etc., replacing part of fossil energy.

3. Environmental Engineering: Due to its strong adsorption, dried peat can be used in wastewater treatment and soil remediation to adsorb heavy metals or organic pollutants.

4. Industrial Materials: Used as raw materials for lightweight building. 

Certifications

FAQ

Q: What is your Business Model? Trading company or factory?
A: We are an 20 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Jining Shandong province, China, you can come here by air or train. We will pick you up at the airport or the train station. Welcome to visit our factory.
Q: What is the Quality of your products?
A: Shandong Yunfan Heavy Industry Group Co.. Ltd products come with the best quality, and our products passed CE certification, exported to lots of countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality.
Q: How long is the Warranty of your equipment?
A: Our warranty period is 12 months generally.

Q:What is the Quality of your products?
A:Shandong Yunfan Heavy Industry Group Co., Ltd. products come with best quality, and our products passed CE certification, exportecto lots countries around the word, such as Malaysia, India, indonesia, Nigeria,Kazakh,Vietnam,Russia, Philippinesltaly, Brazil, Argentina, South Africa, etc. You can rest assured with the quality absolutely.
 Q:What should l provide to get the suitable quotation?
A:1.What is the raw material for the production line?
2. What is the capacity per hour you required?
3. What is the maximum input size of the raw material?
4. What is the output size and application for the final product?
You can send inquiries from this page. Once we get your answers, we can provide you the bestquotation immediately.
Remarks: The price will depend on different models